Static Routing

This is a continuation of the previous how to located here.  You can download this Packet Tracer file from here.

In this how to, we have configured router 0 to allow communication between networks 10.0.0.0 and 192.168.50.100

You do this by running the following command on Router 0

ip route 10.0.0.0 255.0.0.0  10.0.0.0

 

Static_routing

Share Button

Static Routes between two routers.

The instructions below show how to connect two networks with static routes. Download the PacketTracer file

  • Router1 belongs to network 192.168.0.0 – 255.255.254.0
  • Router2 belongs to network 192.168.2.1 – 255.255.255.192
  • Both routers will communicate with each other via network 10.0.0.0-255.255.255.192

static_routes1

Router1
Setup Network Interface for 192.168.0.0 network

show ip interface brief
enable
configure terminal
no ip domain lookup
no logging console
hostname router1
interface GigabitEthernet0/0
ip address 192.168.0.0 255.255.254.0
duplex full
no shutdown
copy running-config startup-config

Setup Network Interface for 10.0.0.0 network

interface Serial0/0/0
ip address 10.0.0.1 255.255.255.192
no shutdown
ip route 192.168.2.0 255.255.255.192 10.0.0.2
copy running-config startup-config

Router2
Setup Network Interface for 192.168.2.0 network

show ip interface brief
enable
configure terminal
no ip domain lookup
no logging console
hostname router2
interface GigabitEthernet0/0
ip address 192.168.2.0 255.255.255.192
duplex full
no shutdown
copy running-config startup-config

Setup Network Interface for 10.0.0.0 network

interface Serial0/0/0
ip address 10.0.0.2 255.255.255.192
no shutdown
ip route 192.168.0.0 255.255.254.0 10.0.0.1
copy running-config startup-config
Share Button